Sabertooth Dual 2x32A 6V-24V Regenerative Motor Driver

Description

Sabertooth Dual 2x32A 6V-24V Regenerative Motor Driver. Condition is New.
Regenerative dual channel motor driver
Current: 32A (continuous), 64A (peak per channel)
Ultrasonic 30 kHz switching frequency
Analog, R/C, serial, USB input modes
It will work as intended right out of the box, It is also very powerfull for its size, driving two 500W motors easily.
The option to limit (scale down) speed by auxiliary signal is very usefull.
The usb allows you to adjust settings on the laptop
Sabertooth Dual 2x32A 6V-24V Regenerative Motor Driver is a dual channel motor driver capable of supplying 32 amps to two motors, peaking at currents up to 64 amps per motor. It can be operated from radio control, analog, TTL serial or USB inputs. It uses regenerative drive and braking for efficient operation. A variety of operating modes including tank style mixing and automatic calibration allow most projects to work immediately out of the box.
Some addition to the standard operating modes, Sabertooth 2x32 features additional signal inputs and power outputs, as well as configuration options that are enhanced. User-defined operating modes allow for custom operation, such as on the fly switching between radio control and computer-driven inputs, emergency stops or front panel control overrides. The auxiliary power outputs can be configured to allow the Sabertooth 2x32 to operate from a power supply without a parallel battery, or automatic control of electromagnetic brakes. If combined with Dimension Engineering’s Kangaroo x2 motion control module, the Sabertooth 2x32 can be used for closed-loop position or speed control with encoder or analog feedback. The state of the driver can be monitored in real time using the USB port in any operating mode, making debugging your project faster and easier. Sabertooth 2x32 is more flexible, robust and powerful than previous motor drivers, while also being easier to use.
Specifications
32A continuous, 64A peak per channel
6-30V nominal, 33.6V absolute maximum
Synchronous regenerative drive
Ultrasonic 30 kHz switching frequency
Thermal and overcurrent protection
Battery protection mode
USB control and monitoring
USB serial converter mode for Kangaroo x2
Configurable current limiting
Custom user modes
12-bit motor outputs
Input modes: analog, R/C, serial (plain text or packetized), USB
Power outputs can act as voltage clamps, brakes, or be controllable
Use Cases
Combat robots up to 100lb
Normal and hobby robots up to 300lb
Differential drive robots
Electric vehicles, ride-on toys, scooters
Package Includes
1 x Sabertooth Dual 2x32A 6V-24V Regenerative Motor Driver
Dimensions
Size: 2.75” x 3.5” x 1.0”
70 x 90 x 25 mm
Weight: 125g
Disclaimer
Due to the current pandemic all shipping companies are experiences various delays and deliveries may take a longer time than estimated.